If you’ve always wanted to make your own wine, then you are in luck. That is because I am going to tell you how to get started making your own wine products. While this guide isn’t a comprehensive guide on the art of wine-making—after all, I really don’t have the space to write that—it will serve as a primer to get you started. Hopefully, reading this article will peak your curiosity and get you started down the road to making your own wines.
Before you start however, you are going to need a few items besides your best wine cooler, some bottles and some grapes. You are going to need things such as 2 6 gallon food grade buckets, a siphon hose, a chlorinated sanitizer, something to stir with, a rubber bung, an airlock device, sugar, yeast, a PH balancer, Sulphite, Bentonite, Potasium sorbate, Kieselsol and Chitosan. You can buy all of these things individually from your local home-brew shop or off the Internet, or you can buy them in a complete package. This guide is going to assume that you are using a kit.
Day 1: The next thing you should do is sterilize all of your equipment with your sanitizing solution and rinse it well with fresh water. Take one of your six gallon buckets and make it your primary fermenter. Add the Bentonite to the bucket and add 1 gallon of water. Dissolve completely. Now empty the contents of your juice concentrate bladder. Add 5 more gallons of water to the bucket. Make sure the temperature of the water is around 75 degrees, but no hotter. Stir the mixture well and add the yeast. Don’t stir the mixture anymore after adding the yeast, however. Cap the bucket and place it in a dark, cool location such as your closet. Don’t touch the bucket for a minimum of four days.
Day 5: Check the mixture. It should be nice and foamy, an indicator that the yeast is doing its job. If it isn’t doing this, then you probably didn’t sterilize the equipment properly and will have to start all over. If it’s bubbly, then cap it up and place it in your closet for another 9 days.
Day 14: Sanitize your secondary bucket and siphon the wine mixture into this bucket. Now it’s time to mix in the rest of the ingredients in order and stirring after adding each component. Start off with the Sulphite and then add the Potassium Sorbate, Kieselsol and Chitosan. Allow to sit for 5 minutes. Now sanitize the airlock and place it on your container. Place it your closet for 2 more weeks.
Day 28: Your wine is now done and ready to be bottled. After you have bottled it, place it in your wine cooler and chill it down. If you don’t have a cooler, then check wine cooler reviews and buy a good one. Congratulations on making your first batch of wine!